2222 Switch Mode Power Supply

Brand: PR Electronics

  • 230 or 115 VAC primary voltage
  • 24 VDC output voltage
  • Double isolation by 3.75 kVAC
  • 48 Watt output power, short circuit-protected
  • Thermal protection against overload
Features
  • The power supply is based on primary switchmode technology to achieve a high efficiency.
  • An internally mounted potentiometer allows for a ±5% adjustment of the output voltage.
  • A green LED in the front of the module indicates an active primary voltage.
  • Input circuit protected with a thermal fuse.
  • DC output short circuit protection with current limiter.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.

Specifications

Adjustment

  • ± 5% - Current Output

Approvals & Certifications

  • CE
  • EAC TR CU 020/2011
  • IEC 61140

Dimensions

  • 3.17" x 1.40" x 3.33" {80.5 x 35.5 x 84.5 mm (H x W x D)} - D is without Pins

Environmental Protection

  • IP30

Frequency

  • 50/60 Hz

Humidity

  • < 95% Relative Humidity

Input

  • 1 A SB at 250 Vac - Fuse

Isolation

  • 3.75 kVac at 250 Vac - Test/Working

Mounting

  • DIN Rail Mounting

Output

  • ≤ 40 mVrms (100 kHz) - Output Ripple
  • 2 A at 24 Vdc
  • 24 Vdc
  • Nominal 2.5 A (Electronic) - Current Limit

Power

  • Maximum

Power Requirement

  • Maximum

Supply Voltage

  • 102.4-132.2 Vac
  • 207-253 Vac

Temperature Effect

  • 0.05% / °C - Temperature Coefficient

Temperature Range

  • -20° to 60° C (-4° to 140° F)

Thermal Drift

  • 100° C - Thermal Overload Protection

  • General 24 VDC supply for equipment that requires a stabilized DC voltage.
  • Two units can be connected in series to achieve a plus / minus supply or a higher output voltage.
  • Separation of circuits in safety installations according to the PELV/SELV norm.
  • Galvanic isolation between the primary and the secondary voltage is achieved through the double-isolated safety transformer.

Show More