5343B 2-Wire Level Transmitter

Brand: PR Electronics

  • Potentiometer or Ohmic input
  • Programmable sensor error value
  • High measurement accuracy
  • Unique process calibration function
  • Programmable via standard PC
Features
  • Within a few seconds the user can program PR5343B to measure within the defined Ohmic values.
  • Continuous check of vital stored data for safety reasons.
  • The transmitter is protected against polarity reversal.
  • PR5343B is configured to the current task by way of a PC, the PReset software and the communications interface Loop Link.
  • The PRelevel configuration tool included in the PReset software has been developed specifically for the configuration of level applications. Among other things, it contains a function for ”on line” measurement of input span as well as a linearization function for volume linear output from horizontal cylindrical tanks.

Specifications

Accuracy

  • Better than 0.1% of Selected Range

Approvals & Certifications

  • ATEX 2014/34/EU KEMA 03-ATEX-1538
  • CE
  • DNV Marine Standard F. Certificate No. 2.4
  • EAC Ex TR-CU 012 / 2011 RU C-DK. GB08.V.00410
  • EAC TR CU 020/2011
  • EMC 2014/30/EU
  • Ex
  • FM 2D5A7
  • GL V1-7-2
  • IECEx DEK 13.0036X
  • INMETRO DEKRA 13.0002 X

Connection Style

  • Screw Terminals

Consumption

  • 25 mW to 0.8 W

Dimensions

  • 1.73" (Diameter) x 0.80" (44 x 20.2 mm)

Environmental Protection

  • IP00
  • IP68

Humidity

  • < 95% Relative Humidity, Non-Condensing

Input

  • 25 µA - Sensor Current

Output

  • 16 mA - Minimum Current Signal Range
  • 23 mA - NAMUR NE 43 Upscale
  • 3.5 mA - NAMUR NE 43 Downscale
  • 4-20 mA

Output Function

  • NAMUR NE 43

Output Noise

  • Minimum 60 dB - Signal to Noise Ratio

Power Supply Effect

  • ± 0.005% of Span Per Volt

Resistance

  • 0 to 100 KiloOhms / 1 KiloOhms - Linear Resistance Measurement Range (Span)
  • Maximum

Resolution

  • 16-bit - Signal Dynamics, Output
  • 19-bit - Signal Dynamics, Input

Response Time

  • 0.33 to 60 seconds

Sensor, Probe Connection

  • 3-Wire

Stability

  • ≤ 0.01% of Span at 100 ohms - Load

Supply Voltage

  • 8-30 Vdc

Temperature Range

  • 20° to 28° C (68° to 82.4° F) - Calibration Temperature
  • -40° to 85° C (-40° to 185° F)

Torque

  • 3.54 In/Lbs (0.4 Nm) - Screw Terminal Torque

Update Time

  • 135 milliseconds
  • 5 minutes - Warm-Up Time

Vibration

  • ± 1.6 mm at 2 to 25 Hz as Per IEC 60068-2-6 : 2007
  • ± 4 G at 25 to 100 Hz as Per IEC 60068-2-6 : 2007

Voltage Drop

  • 8 Vdc

  • Conversion of resistance variation to standard analog current signals, e.g. from Ohmic level sensors or valve positions.
  • User-defined linearization function can be activated.

Show More