DG S 150 FM Surge Arrester

Brand: DEHN, Inc.

Pluggable single-pole surge arrester consisting of a base part and plug-in protection module; with floating remote signalling contact.
  • Multi-purpose surge arrester consisting of a base element and plug-in protection module
  • High discharge capacity due to heavy-duty zinc oxide varistor
  • High reliability due to "Thermo Dynamic Control" SPD monitoring device
  • 952 092
    DEHN Surge Arrester, DG S 150 FM
    50+ In Stock

    Specifications

    Brand

    Approvals & Certifications

    • SPD According to EN 61643-11 (Typical 2)
    • SPD According to IEC 61643-11 (Class II)

    Approvals & Certifications

    • CE
    • CSA
    • KEMA
    • UL
    • VDE
    • VDS

    Current

    • Maximum
    • Nominal Discharge Current (8/20 µs): 15 KA
    • Short-Circuit withstand Capability For, Maximum

    Electrical Connectors

    • Cross-sectional Area (Minimum) & Cross-sectional Area for Remote Signalling Terminal, Maximum
    • Cross-sectional Area: Maximum

    Electrical Contacts

    • Typical of Remote Signalling Contact: Changeover Contact

    Electrical Rating

    • AC Switching Capacity: 250 V / 0.5 A
    • DC Switching Capacity: 125 V / 0.2 A
    • DC Switching Capacity: 250 V / 0.1 A
    • DC Switching Capacity: 75 V / 0.5 A

    Enclosure, Body Material

    • ThermoPlastic

    Environmental Protection

    • IP20

    Indication

    • Fault Indication / Operating State: Red/Green

    Mounting

    • 1.37" (35 mm) DIN Rails According to EN 60715

    Operating Temperature

    • -40° to 80° C (-40° to 176° F)

    Operating Voltages

    • Maximum

    Response Time

    • ≤ 25 Nanoseconds

    Voltage

    • Nominal Voltage: 120 Vac (50/60 Hz)
    • Temporary Voltage (TOV) - Characteristic: 175 V / 5 seconds - Withstand
    • Temporary Voltage (TOV) - Characteristic: 230 V / 120 minutes - Safe Failure
    • Voltage Protection Level at 5 KA: ≤ 0.55 kV
    • Voltage Protection Level: ≤ 0.7 kV

    Show More